We need your help to buy the bogies for 10000! Check out the link to find out more.
The Ivatt Diesel Re-creation Society exists to right the wrong that occurred when 10000 and 10001 were scrapped in 1968. We aim to recreate 10000, using a genuine English Electric 16SVT engine and the chassis from Class 58 locomotive 58022, along with parts from other English Electric locos as they become available after retirement from main line use. Remaining parts will be manufactured from new as required.
The Society was formed in 2011 and we are honoured to have as our President Mr Stanley Fletcher, a retired English Electric electrical engineer, who was involved in the commissioning trials for 10000.
The decision to build a new loco of type D16/1 followed a detailed feasibility study by members which looked at the viability of the project, and compatibility with present day legislation.
It is important to note that the loco will not be a precise copy of 10000. We plan to build a locomotive thatwill have the following key features:
• The exterior appearance of the original locomotive
• The sound of the original locomotive
• The original characteristics of the locomotive as far as reasonably practicable
The project is inevitably a lengthy and complex engineering undertaking, but we believe it is entirely achievable. We have evaluated one of 10000’s direct descendants in diesel locomotive design, the BR Class 58. This study established the 58’s suitability as a basis on which to recreate 10000 and has confirmed many similarities between the two designs. Both types of locos were designed at Derby, and some of the design staff were directly involved with both locomotive types. Both designs were drafted utilising the same ‘backbone’ load bearing main frame construction principle. Bogie centres are almost identical, as is the distance between the cab bulkheads, and other critical dimensions.
Use of a Class 58 locomotive chassis will significantly reduce the time and cost of construction compared to a new build. It will also make possible the re-use of the mainframe, cooler group, and other parts towards a cost effective, maintainable and reliable core for the locomotive.
The natural choice for bogies are those available from a BR Class 77. This design is almost identical to those fitted to 10000 and 10001 D16/1 design. We have been in discussion with the EM2 Society, and are now fundraising in earnest. The bogies will fit the Class 58 chassis although some structural design work will be necessary since the Class 58 bogies design differs slightly from that of conventional locos.
The English Electric 16SVT engine owned by the IDRS was originally built as a Rail Traction Locomotive power unit for a potential overseas order which was not confirmed. When English Electric received an order from the Ministry of Defence for standby generating sets, the engines already built were reallocated to the government order. The unit was kept indoors and serviced regularly although it ran very low hours before sale to us, so it is almost as good as new!
The 16SVT engine and 58022 are now both based at Rowsley South on the Peak Railway.
As a volunteer led project, completion of 10000 depends entirely on volunteer hours and donations. The Society has so far attracted over £60,000 in donations and owns the 16SVT power unit and class 58 locomotive outright.
Much technical planning has been undertaken by dedicated volunteers, taking thousands of hours. The process of construction begins with a period of collecting the necessary key components and drawings, which although not visually appealing, is a necessary preliminary stage before construction begins properly. Although a lot of work was going on in the background, the society did not always appear very active publicly. However, in 2017 additional members and trustees came on board, renewed the public face of the Society and invigorated fundraising.
Stripping 58022 to its chassis and bogies is the next large task, and will be undertaken as soon as practical, after which any unrequired parts will be sold or scrapped. Hopefully we will soon acquire a set of bogies, at which point they will be overhauled and painted. Meanwhile the search for components continues. Various options exist for which traction motors to fit to 10000, depending largely on availability of parts. At this stage, collection of components is of more of a priority than constructing the locomotive per se, even though such activity is not as photogenic.
Time is of the essence. Components from first generation diesel designs, particularly Classes 20 and 37 will only be available for a short time longer. Hence the Society is now urgently fundraising for both bogies and other parts. If you are able to help, by donating, becoming a member, or just buying something in the shop, every effort is appreciated, and will all help us to achieve our aim of recreating the legend.